Yaesu FTdx101MP

The Yaesu tradition of quality in HF equipment continues with the new FTDX101MP, created as a tribute to Yaesu founder Sako Hasegawa JA1MP.
This transceiver covers the HF/50 MHz bands and can deliver 200 watts of output power. VC Tune on both main and sub receivers, together with roofing filters for CW at 300 Hz (main only)/600 Hz, SSB (3 kHz), and AM (12 kHz), makes this radio one of the best in its class.
With 3DSS (3-Dimensional Spectrum Stream), you can see signals that might otherwise be impossible to tune at the exact moment they appear due to their short duration.
The use of high-quality advanced SDR receivers enables narrowband operation and direct sampling. This allows reception of signals that others may not be able to hear.
Another notable point is that you do not need to worry about which external power supply or speaker to use with the FTDX101MP: the radio is supplied with a matching speaker/power-supply unit. This package makes the FTDX101MP not only a high-quality radio, but also an icon of design.

Top-class performance

- Hybrid SDR receivers (narrowband SDR and direct-sampling SDR)
- 2 kHz RMDR 123 dB+
- 2 kHz BDR 150 dB+
- 2 kHz, 3rd IMDR 110 dB+
- 400 MHz HRDDS (High Resolution Direct Digital Synthesizer)
- Phase noise at 2 kHz: -150 dBc/Hz
- VC-TUNE (Variable Capacitor Tune) signal peaking
- 3DSS display (3-Dimensional Spectrum Stream)

Main technical specifications

TX frequency ranges
1.8-50 MHz (amateur bands only)
70-70.5 MHz (UK amateur bands only)

RX frequency ranges
30 kHz-75 MHz (operating)
1.8 MHz-29.699999 MHz (performance guaranteed on amateur bands only)
50 MHz-53.999999 MHz (performance guaranteed on amateur bands only)
70 MHz-70.499999 MHz (performance guaranteed on UK amateur bands only)

Emission modes
A1A (CW), A3E (AM), J3E (LSB/USB), F3E (FM), F1B (RTTY), G1B (PSK)

Tuning steps
1/5/10 Hz (SSB, CW), 10/100 Hz (AM, FM)

Antenna impedance
50 Ohm, unbalanced (tuner off)
16.7-150 Ohm, unbalanced (tuner on - amateur range 1.8-29.7 MHz)
25-100 Ohm, unbalanced (tuner on - 50 MHz amateur range)

Operating temperature
From 0°C to +50°C

Frequency stability
±0.1 ppm (after 1 minute, from -10°C to +60°C)

Power supply
100/200 VAC (FTDX101MP)
13.8 VDC ±10% (FTDX101D)

Current consumption
RX (no signal) 100 VA (FTDX101MP)
RX (no signal) 3.5 A (FTDX101D)
RX (with signal) 120 VA (FTDX101MP)
RX (with signal) 4.0 A (FTDX101D)
TX 720 VA (FTDX101MP 200 W)
TX 23 A (FTDX101D 100 W)

Dimensions
(W x H x D) 420 x 130 x 322 mm

Weight (approx.)
14.2 kg (FTDX101MP)
12 kg (FTDX101D)