Yaesu FTdx101D
zoom_out_map
chevron_left chevron_right

Yaesu FTdx101D

All-mode HF/50/70 MHz hybrid-SDR transceiver

€0.00
VAT included

Description

The latest-generation HF/50 MHz transceiver FTDX101D continues the Yaesu tradition of high-quality HF products. It takes its name from the legendary FT-101, a milestone in the history of HF transceivers.
Its 100 watts of output power, VC Tune for the main band (optional for the second band), and roofing filters for CW (600 Hz), SSB (3 kHz), and AM (12 kHz) make this radio ready for the most demanding challenges, even in the presence of very weak signals.
"We believe that hearing a weak DX signal in a severe interference environment is the most important requirement for HF DX communication equipment in any era. Achieving this goal has been Yaesu's ultimate mission for more than 60 years."

Top-class performance

- Hybrid SDR receivers (narrowband SDR and direct-sampling SDR)
- 2 kHz RMDR 123 dB+
- 2 kHz BDR 150 dB+
- 2 kHz, 3rd IMDR 110 dB+
- 400 MHz HRDDS (High Resolution Direct Digital Synthesizer)
- Phase noise at 2 kHz: -150 dBc/Hz
- VC-TUNE (Variable Capacitor Tune) signal peaking
- 3DSS display (3-Dimensional Spectrum Stream)

Main technical specifications

TX frequency ranges
1.8-50 MHz (amateur bands only)
70-70.5 MHz (UK amateur bands only)

RX frequency ranges
30 kHz-75 MHz (operating)
1.8 MHz-29.699999 MHz (performance guaranteed on amateur bands only)
50 MHz-53.999999 MHz (performance guaranteed on amateur bands only)
70 MHz-70.499999 MHz (performance guaranteed on UK amateur bands only)

Emission modes
A1A (CW), A3E (AM), J3E (LSB/USB), F3E (FM), F1B (RTTY), G1B (PSK)

Tuning steps
1/5/10 Hz (SSB, CW), 10/100 Hz (AM, FM)

Antenna impedance
50 Ohm, unbalanced (tuner off)
16.7-150 Ohm, unbalanced (tuner on - amateur range 1.8-29.7 MHz)
25-100 Ohm, unbalanced (tuner on - 50 MHz amateur range)

Operating temperature
From 0°C to +50°C

Frequency stability
±0.1 ppm (after 1 minute, from -10°C to +60°C)

Power supply
100/200 VAC (FTDX101MP)
13.8 VDC ±10% (FTDX101D)

Current consumption
RX (no signal) 100 VA (FTDX101MP)
RX (no signal) 3.5 A (FTDX101D)
RX (with signal) 120 VA (FTDX101MP)
RX (with signal) 4.0 A (FTDX101D)
TX 720 VA (FTDX101MP 200 W)
TX 23 A (FTDX101D 100 W)

Dimensions
(W x H x D) 420 x 130 x 322 mm

Weight (approx.)
14.2 kg (FTDX101MP)
12 kg (FTDX101D)

Data sheet

You might also like